|
Senville split systems
Senville is proud to introduce to the North American market, the state of the art DC INVERTER type Wall mount Split Air Conditioner Heat Pumps in four models, 9000 BTU, 12000BTU, 18000 BTU and 24000 BTU.
Each unit is equipped with cutting-edge and high-tech Inverter Technology that provides Energy Saving, Rapid Cooling and Heating Capability, Longer Performance Life, DSP High Speed Chip, Small Temperature Fluctuations, Silent Operation and Very Low Noise, Wide Voltage Supply and Ultra-wide Outdoor Ambient Operating Temperature.
A Senville Ductless Split Air Conditioner combines the cooling capabilities of a central air conditioning system with the zoning flexibility of conventional window air conditioners. The system is comprised of two main units, a compressor and an evaporator.
The outdoor unit, commonly known as the compressor, delivers the coolant to the evaporator via small copper tubing. This tubing enters the building through a small opening in the wall and connects the indoor unit with the outdoor unit. The indoor unit, commonly referred to as the evaporator, is installed on the wall in the desired room without the use of ducts.
Warm air is taken in by the evaporator then cooled using a heat exchanger. The cool and filtered air is then dispensed back in to the room.
Senville products are so reliable that it offers one of the most aggressive warranties available in the world. Each unit is passed through an agressive and relentless quality control process and then run for over 80 hours before passing through to the packaging department.
Ductless, mini-split air conditioner technology has been proven for more than 10 years in countries of Europe, Africa, Australia, Middle East and Far East.
 |
Senville mini-split units are specifically designed to operate in the most extreme temperatures and withstand the harshest elements, while operating super quietly and at high efficiency.
Mini-split systems are easy and quick to install and provide added security (against intruders) compared to window and wall type units and combine the zoning flexibility of conventional room units with the cooling capability of a central system. |
Senville mini-split units are specifically designed to operate in the most extreme temperatures and withstand the harshest elements, while operating super quietly and at high efficiency.
Senville provides the most superior and technologically advanced air conditioning products to ensure efficiency and economical costs of operation.
Senville Air conditioning systems are the result of years of meticulous design and engineering that combines efficiency, functionality and elegance in a mini-split package.
very quiet
In Conventional Window Air conditioners, most of the compressor noise comes directly in to the room. With Senville Split Air conditioners, the noise of the compressor stays out side where it can not be heard inside the room.
 All Senville products use the leading professional choice for efficient, reliable, and durable performance compressors such as TOSHIBA and PANASONIC. Few moving parts and no pistons also reduce operating noise and reduce wear for longer life.
INVERTER TECHNOLOGY
Senville Digital Inverter technology maintains precise control of room temperature and creates a comfortable environment.
In conventional units, the compressor switches off once the set temperature is reached, and switches on again after temperature drops.
The time it takes for the unit to switch on and off causes the room temperature to greatly fluctuate.
With Senville Digital Inverter, the inverter control reduces the compressor power once the desired temperature has been reached, but continues operating at a reduced state to maintain a stable room temperature with minimal fluctuations.
By putting an end to on/off compressor operation, the inverter technology also allows Senville Digital Inverter to significantly reduce noise levels. Superior reliability has been achieved, due to the reduction of the compressor ON/OFF cycles.
Why R410a
 There is a growing concern for the environment in our industry and so now all Senville air conditioning units are pre-charged with R-410a which is an ozone friendly refrigerant.
When in cold mode, the gas inside the air conditioning unit is compressed, it absorbs heat and releases cold air. When in heat mode, the gas inside the air conditioning unit is compressed, it absorbs cold air and releases heat .
The 410 gas is the gas that best meets the requirements for stability, non-toxicity, uninflammability and high thermodynamic efficiency at the present time.
Making Sense of Energy Ratings
Under the terms of the National Appliance Energy Conservation Act (NAECA), energy-efficiency standards for residential cooling systems have been raised. A minimum of 13 SEER (Seasonal Energy Efficiency Rating) is required for air conditioners and 13 SEER/7.7 HSPF (Heating Seasonal Performance Factor) for heat pumps.
Equipment rated 13 SEER or higher costs more than 10- and 12-SEER systems. However, it’s important that you consider overall value. The improved energy efficiency of higher-SEER equipment will lower your utility bills, saving you money in the long run.
To View User Manuals for these units, please click here.
IMPORTANT NOTICE;
We Store This Item in Both Our Montreal and Los Angeles Facilities. No Matter where you are, US or Canada, We Will Ship This Unit to Your Door without crossing Borders, No Duties or Custom Fees.
YOUR ORDER INCLUDES:
- INDOOR UNIT (WALL MOUNT UNIT) EQUIPPED WITH MOUNTING BRACKET
- OUT DOOR UNIT (THE COMPRESSOR)
- INSTALLATION KIT INCLUDES INSULATED COPPER TUBING, SLEEVES, TAPES, SILICONE ETC
- FULLY BILINGUAL FRENCH/ENGLISH OWNERS MANUAL & INSTALLATION MANUAL
- FULLY DIGITAL REMOTE CONTROL (BATTERIES INCLUDED)
- WARRANTY CARD ENDORSED BY SENVILLE
FOR A LIMITED TIME, WE WILL SHIP THIS UNIT TO YOUR DOOR FREE OF CHARGE! | 
